Delta Faucet Quick Connect Problem

Reinstall the cartridge making sure thatthe key is fully engaged with the slot in the brass body.

Delta faucet quick connect problem.

Removethe sleeve bonnet and cartridge. With quick snap connections newer delta widespread faucets feature quick snap installation. Make sure the water suppliesare turned off. If you have quick snap connections and experience leaking at the connection points quick snap may not have been properly installed.

Reinstall the cap on thecartridge. Pull the trigger to drain out any water that still remains in the hose. Here s how to disconnect sprayer hose from delta faucet. Pull the cap from the cartridge androtate it 180 degrees or one half turn.

The white retainer and o ring were most likely displaced through installation and removal of the quick connect hose connections. Removing the old sprayer hose. Install the bonnet and sleeve making sure the o ring is behind the groove on the brass valve body. Reinstall the cap on the cartridge.

Reinstall the cartridge making sure that the key is fully engaged with the slot in the brass body. Unscrew the slide nut that holds the spray head together. Before beginning to remove the sprayer and hose assembly turn off the shutoff valve under the sink. Be sure the hot side marking on the cartridge is facing toward the right.

The exact repair part will depend on the model and age of your faucet. When pushing the quick connect fitting onto the tubing ensure that you have pushed the tubing in far enough that it has depressed the o ring and sealed the fitting.